 |
 |
VISIONAIR is the perfect software partner for GCS03
ground control station and AP04 autopilot system. It
is a reliable and thoroughly tested software application
that offers an intuitive and friendly graphic user interface.
VISIONAIR is flexible in its concept, which enables
customization for specific applications.
Forget about steep learning curves, VISIONAIR is the
most intuitive product of its category, enabling anyone
to be in command of a UAV in a matter of minutes, with
no specific computer training and/or programming skills.
It enables user to focus on the mission, providing video
and vehicle location. Supplementary information like
attitude and engine parameters can be displayed. High
resolution terrain elevation maps are shown in the background
to better track down the position of the vehicle at
every stage of the flight.
Software is prepared to log data from every flight and
will offer enough information, not only of the sensors,
camera, or attached hardware, but also all the information
of the vehicle dynamics. This enables engineers to improve
the quality of the whole data acquisition process on
the chosen UAV.
VISIONAIR is the ultimate tool for those who need to
be fully in command of a UAV specially over populated
areas, and other critical zones.
This possibility goes further when combined with FLIR
camera allowing a UAV to be controlled in the dark or
in extremely reduced visibility conditions, such as
cloud or dense fog. VISIONAIR controls gimbal cameras
with specific interfaces and can also be visioned in
the same environment.
UAV Navigation is a privately owned company that specializes
in the design of flight control systems for unmanned and
manned aircraft. |
| |
|
VISIONAIR - Key features:
• Multi UAV management with UAV-type automatic detection
Command and control multiple UAV’s at the same time with just one GTRACK GDT. The operator can command the active UAV while observing the other ones. With a simple click, the active UAV can be changed.
• Records and plays video and data synchronously
To give the maximum information of the mission, Visionair synchronizes the recording of data and video to optimize the post flight analysis.
• Reliable, mature and combat proved
The best warranty of the quality of Visionair is its experience on the field. It has been proven successfully in a wide range of missions.
• Intelligent alarms management
Visionair implements a new alarm management system, which automatically analyzes the UAV mode and its environment to decide if certain sensor readings are reason to launch the alarm or not. Audible alarms are implemented.
• Mission oriented
Visionair provides video and vehicle location displayed in high reslution terrain elevation maps. Supplementary information like attitude and engine parameters can be displayed.
• Point and click operation
Visionair is the most intuitive product of its category, enabling anyone to be in command of a UAV in a matter of minutes, with no specific computer training and/or programming skills.
• Network data broadcast and network remote control of the UAV
Client/Server option for remote UAV monitoring or control through TCP/IP connection for remote broadcast and control of the mission.
|
|
VISIONAIR - Main characteristics:
• Multiple map format: BMP, JPEG, GIF, TIFF, PNG, GEOTIFF, ...
• Multiple coordinate types: Lat/Lon in multiple formats, UTM, MGRS, ...
• Multiple DEM formats: USGS DEM, .dem.gz, BIL, TIFF, DTED, SRTM, ...
• On the fly mission update
• Multiple UAV modes: automatic, hold, directed, fly to, take off, land, manual, sea skimming, ...
• Multiple camera modes: air, ground, geo, pilot view, stow, offset, rate, ...
• User friendly camera control with gamepad interface
• Works with any video capture device that works in Windows XP/Vista
• Fly/No fly zones editor: prevent the violation of reserved or restringed airspace
• Target editor: identify your targets and tag them
• GCS radio coverage: with the DEM terrain model Visionair can detect the area of radio hcoverage based on the terrain orography.
• User customizable interface
• Supports DGPS: increase the accuracy of your GPS system
• NMEA output: connect to any software ready to accept GPS signal
|
|
|
|
|
Download in 
All
rights reserved