The Target In/Out 02 (TGTIO02) is a peripherals control board for target drones designed to control multiple sequences as follows:
- Smoke or IR flare pyrotechnics (up to 8 elements each)
- Engine kill
- Parachute release
As such it is an excellent solution for integrating all the peripheral functions of a target drone. It is also a good choice where limited in-out (I/O) connectivity is available from the existing autopilot (AP).
|
INPUTS |
|
|
PWM input ranges |
1 ms to 2 ms high, 50Hz 0 to 3.3V or 0 to 5V |
|
Sequencer triggers |
1.75ms high |
|
Sequencer resets |
1.25ms high |
|
Engine kill / parachute triggers |
1.55ms high |
|
Engine kill / parachute resets |
1.45ms high |
|
SUPPLY |
|
|
Supply voltage range |
9 to 15V |
|
Idle current consumption |
150mA |
|
OUTPUTS |
|
|
Sequencer outputs |
Four 100ms pulses |
|
Sequencer outputs drive |
2A |
|
Engine kill drive |
-200mA |
|
Parachute drive |
1A continous, 3A peak |
| MECHANICAL | |
| Size (mm, H x W x L) | 10.1 x 90.0 x 100.0 |
Key features:
- Protected against Electro-Static Discharge (ESD) events on the pyro outputs
- Protected against shorted pyro fuzes